JXY600L Crawler Vertical Spine Water Well Drilling Machine

It has a hydraulic pressure feeding mechanism to improve drilling efficiency. It is equipped with a bottom pressure gauge to indicate the pressure, which is convenient for grasping the inside of the hole. It has a normally closed hydraulic chuck for easy and flexible operation. Independent operation of the vertical shaft and the hoist can be realized. The vertical shaft through hole has a large diameter and can be replaced with a large hexagonal active drill pipe.

The hydraulic control drill mast can be raised and put down by the hydraulic cylinders,which increases labor safety; saves time and labor usage.The drilling rig adopts automatic telescopic mast, hydraulic cylinder support, hydraulic control drilling tower up and down, the operation saves time and labor, is safe and reliable.

>> Characteristics

1. The rubber wire track is light in weight and does not damage the urban road.

2. Four long hydraulic stands can lift the machine to Max. height 1.3m so that the rig can be loaded and unload from the truck.

3. 24V electric start for diesel engine permits the rig to work in all kind of extreme weather condition.

4. The hydraulic tube twist machine can be installed, which saves time and increases the working efficiency to unload the rod.

>> Specification

Description		JXY600C
	Drilling depth	30-600m
	Drilling diameter	300-75mm
	Max.Hole Diameter	500mm
	Drilling Angel	0-90°
	Mast height	7000mm
	Mast effective height	6500mm
	Kelly/active pipe	59*53mm
	Weight(Without truck)	2950kgs
Spline	Structure	Ball bearing
	Spindle rotating speed-Forward	30-1050rpm
	Spindle rotating speed-revise	29-137rpm
	Spindle inner diameter	96mm
	Spindle stroke	560mm
	Spline Max.Torque	3800N.m
Hoist	Max.Hoisting Capacity	4000kgs
	Hoisting speed	0.5-1.9m/s
	Wireline diameter	14mm
	Main hoisting line capacity	30m
Power Unit	Rated power-Diesel	38kw/2200rpm
	Rated power-Electric(Optional)	22kw
Mud pump(Optional)	Rated flow	160/200L/min
	Rated pressure	1.3/4Mpa
	Driving power	5.15kw
	main machine weight	190kg
	Dimension	1110*725*965mm
Drill Pipe	Drill pipe length	4.2m
	Drill pipe diameter	42/50/60/76mm
Chassis	Model	Steel Crawler
	Drive mode	Hydraulic
	Moving peed	2-3km/h
Stabilizing Jack	2 front jacks and 2 rear jacks.
	Type	Hydraulic
	Stroke	350 mm
Dimensions	Overall length	6300 mm
	Overall width	2200 mm
	Overall height	3420 mm

>> Shipping